If your tonneau cover is damaged, first, measure the size of the tear. This measurement will show you how much skin patching you will need. Try to find a leather patch that matches the cover color of your tonneau. You can check out the best tonneau factory outlet if you want to find various choices.

Then, remove the tonneau cover from the back of your truck and place it on a clean surface. If you don’t have a workbench, you can use the ground as long as you move sharp objects that could further damage or puncture your leather covering.

Next, mark your skin where you will sew. Do not place the stitch too close to the tear; otherwise, the muscle itself will cut through the skin and create more tears. Give it about 1/2 inch. You can use a regular marker for this step as you will patch it later in comfortable skin.

Thread the needle. Remember to put a knot at the end to keep the thread attached. Do not replace ordinary threads, as they will break more easily than threads. Muscles are thick and strong and are meant to be used for skin or other thick material.

Slowly aim the needle at the mark you made earlier. Try to place the stitches as close to each other as possible.

When you are finished sewing, glue the leather patch over the seam. Apply glue to loose patches and ensure an even amount of adhesive covers the entire surface. Apply firm pressure to all sides. Let it dry.

Furthermore, a waterproof spray will ensure that water doesn’t seep into any areas that are not left without water or are not allowed to roam.

Finally, put your truck’s tonneau cover back on the bed of your truck. Now your tonneau cover will work once again. It may not be as good as the new one, but it will protect the contents of your truck bed.