2010 - MINI Rear Wheel Drive - RULES
MAY RUN AFTER MARKET HEADERS, PULLEYS, OIL PAN, VALVE COVER, WIRES/IGNITION PARTS
- WEIGHT: 2000 lb min or 1 lb per CC must be printed right side.
- ENGINE: 4 cylinder stock,for make and model block, rods, head (crank can not be lighten,) May balance (no turbos or superchargers) CAST PISTON (may be .60 over no light Wt. or forged)
- CAM: ANY hydraulic , HEADS: stock valves can not alter head from stock any way factory steel unless car is equip with alum(Toyota/Nissan etc) .
- CARB / INTAKE: Stock or 2bbl 500 max. no altering period except choke.
- CLUTCH / FLYWHEEL: (may surface clutch side only): Stock Type Size & Weight for car Must have 2" inspection hole in bell housing.
- STOCK TRANSMISSION/DRIVELINE/REAR END (may lock):
- FUEL CELL: track approved tank(must have steel straps).Electric pump OK if factory on car. Must be wire to oil pressure gauge.
- ROLL CAGE: 4 point minimum with 3 driver door bars minimum.
- SEAT: Racing or stock. (Stock must weld hinges).Racing seatbelts (3") are required.
- BODY: stock steel Must WELD doors. Must remove all trim, upholstery and glass
- BODY OPTION: Add 75 lbs above 1 lb per CC for homemade/after market body. Must be stock apparing NOSE to TAIL, MATCHING FRAME CLAIMED. Stock Floor pan / Firewalls must remain intact.
- SUSPENSION: MUST REMAIN STOCK in STOCK location stock type spring & shock.
- FRAME: (may tie together tubing must stop at the end of front & start of rear clip).
- TIRE: Radial tire must be available locally & retail for no more than $50.00 including tax.
- WHEEL: Steel 7" max
PROTEST: Top 5 placed cars may protest the car in front of them only.
5th may protest 4th only.
4th may protest 3rd only.
3rd may protest 2nd only.
2nd may protest 1st only.
1: Visual $25.00
2: Clutch-$100.00
TRACK RETAINS 100% & 50% of Motor-$250.00
MUST HAVE TOW HOOKS FRONT & REAR
CAR MAY BE IMPOUNDED FOR 2 DAYS for TECH
Updated: 10/06/2009