2010 - PRO STREET RULES


  1. CHASSIS:     Full factory frame may be replaced rear clip with tubing only from center of rear end back. Tubing can only be used in front of steering box for bumper mounts. 2800 lbs Stock Clip cars must be stock from firewall to front of steering box. (May tube to rear) 2900 lbs. Lower a-frames stock type only. Tube uppers A are OK. One shock per wheel (No adjustable or coil over). Jack bolts OK. 108" w b min. MUST have racing seat & belts. MUST have a full cage with 3 door bars min. Brake calipers must be stock type.


  2. REAR END:/strong>     Any Must be mounted solid. (Solid link or rubber mounted top link only. Shock OK). No torque arms or lift bars.


  3. BODIES:     max width 76" (STOCK type nose and tail not to exceed 46" from center of hub).


  4. ENGINES:     OEM steel block NO dry-sump. NO roller cam. Headers & MSD allowed.


  5. HEADS:     Steel only. Stud girdles & roller rocker arms OK No shaft-type.
    (HEAD BUY RULE $750. 2ND PLACE ONLY ELIGIBLE TO BUY WINNER)


  6. CARBURETORS/FUEL:     Any gas only carb with spacer OK. NO electric fuel pumps. Fuel cell is mandatory. STOCK (may remove choke) 500 CFM 2 bbl HOLLEY 4412 150lb weight break


  7. TRANSMISSIONS:     OEM transmissions, (Bert TYPE add 150 lbs). Driveshaft must be steel / white with 2 loops.


  8. CLUTCH:     ANY. Must have protective bell housing / belting or steel plate.


  9. TIRES/WHEEL:     60 durometer(American EC $82) 10” Max steel wheel. Bead lock OK


  10. WEIGHT:     Full Frame 2800 lb Stock Clip tube rear 2900 lb Bert type Trans Add 150 lbs.
    OPTION: 2 bbl 500 4412 deduct 150 lbs WEIGHT must be printed on right front


  11. PROTEST:     Head buy rule ($750) or (**Visual $100 after heats only Track retains all** )
    All protest must be filed with TECH @ scales immediately following race.

    Race track has the right to make changes and let a car race


Updated: 10/28/2009

2010 RULES