2010 - MINI FRONT WHEEL DRIVE - RULES

1. ENGINE:     4 cylinder stock for make and model (no turbos or superchargers)



2. WEIGHT:     2000 lb min or 1 lb per CC. WGT. must be printed on right side V teck or DUAL CAM ADD 100 lbs in 2 piece bolted in, to be removed to weigh



3. CLUTCH:     Stock Type Size & Weight for car Must have 2" inspection hole in bell housing.



4. FUEL CELL:     Track approved tank(must have steel straps).Electric pump OK if factory on car. Must be wire to oil pressure gauge.



5. ROLL CAGE:     4 point minimum with 3 driver door bars minimum



6. SEAT:     Racing or stock. (Stock must weld hinges).Racing seatbelts (3") are required.



7. BODY:     Must WELD doors. Must remove all trim, upholstery and glass



8. BODY & SUSPENSION:     MUST REMAIN STOCK in STOCK location.



9. DRIVELINE:     STOCK (may lock)



10. TRANSMISSION:     STOCK



11. TIRE:     Radial tire must be available locally & retail for no more than $50.00 including tax.



12. WHEEL:     May be aftermarket *(must be stock size/off set for make & model).

MAY RUN AFTER MARKET HEADERS, PULLEYS, OIL PAN, VALVE COVER, WIRES/IGNITION PARTS

PROTEST:     Top 5 placed cars may protest the car in front of them only.
5th may protest 4th only.
4th may protest 3rd only.
3rd may protest 2nd only.
2nd may protest 1st only.

1: Visual $25.00
2: Clutch-$100.00

TRACK RETAINS 100% & 50% of Motor-$250.00

MUST HAVE TOW HOOKS FRONT & REAR

CAR MAY BE IMPOUNDED FOR 2 DAYS for TECH